Loading...

The Silicon Shift Reshaping IoT Hardware From the Inside Out

IOT News

Published by IOT San Jose Research & Editorial Team

The Silicon Shift Reshaping IoT Hardware From the Inside Out

RISC-V, an open instruction set architecture that began as a research project at UC Berkeley, crossed 25 percent global market penetration at the start of 2026, becoming what industry analysts now call the third pillar of computing alongside the long-dominant x86 and Arm architectures. That milestone matters well beyond the data center chips getting most of the headlines, because the same forces reshaping high-performance computing, a memory cost crisis, rising demand for chip customization, and pressure to cut licensing overhead, are pushing IoT semiconductor design through an equally significant shift toward chiplet-based hardware. For a San Jose-headquartered company like Cadence Design Systems, whose chip design tools sit underneath much of this transition, the change is not a distant industry trend but a live product roadmap playing out in its own backyard.

Why the Memory Crisis Is Accelerating RISC-V Adoption in IoT

IoT chip design has traditionally leaned on licensed processor architectures, primarily Arm, which charge royalties typically in the range of 1 to 2 percent of total chip or device price plus significant upfront licensing fees. For high-volume, low-margin IoT devices, that royalty structure eats meaningfully into already thin margins. RISC-V's royalty-free, open instruction set removes that cost entirely, letting device makers redirect the money toward internal engineering instead. That financial case has existed for years, but 2026 marks what industry analysts describe as an inflection point where rising memory prices and broader cost pressure across consumer electronics are pushing IoT device makers to actively favor RISC-V's leaner, more modular silicon designs, which typically require less memory overhead than comparable Arm-based implementations.

Industry research firm IoT Analytics has specifically flagged 2026 as the year IoT original equipment manufacturers begin scaling from early edge AI pilot programs into broad portfolio refreshes, with RISC-V adoption identified as one of the key architectural shifts accompanying that transition, alongside a parallel move away from monolithic system-on-chip designs toward modular chiplet architectures.

A Concrete Illustration of the Cost Math

It helps to put actual numbers behind the licensing argument driving this shift. A mid-volume IoT product shipping a few million units annually at a modest per-unit chip cost can see royalty payments to a licensed architecture provider run into the millions of dollars over a product's lifetime, on top of upfront licensing fees that can themselves reach into seven figures before a single unit ships. For a hardware startup or a mid-size South Bay electronics company operating on thinner margins than a smartphone flagship, that royalty structure represents real, ongoing cost that scales directly with sales volume, which is precisely the wrong incentive structure for a company trying to grow unit volume as fast as possible. RISC-V's royalty-free model removes that scaling penalty entirely, which is why the economic argument for it strengthens, rather than weakens, as a product line grows successful.

What Chiplets Actually Change About IoT Hardware Design

A traditional monolithic system-on-chip packs every function, processing, memory control, connectivity, security, onto a single piece of silicon designed and manufactured as one unit. Chiplet architecture instead breaks those functions into separate, smaller silicon dies that are manufactured independently and then assembled together in a single package. This modularity matters enormously for IoT specifically because it lets device makers mix and match standardized compute, connectivity, and security chiplets rather than designing an entire custom chip from scratch for every new product, which historically drove up both non-recurring engineering costs and time to market, particularly punishing for smaller IoT hardware companies without the budget of a major consumer electronics brand.

Cadence's January 2026 launch of a chiplet partner ecosystem, developed from its San Jose headquarters, is a direct response to this shift. The ecosystem combines pre-validated intellectual property from partners including Arm, Arteris, and several specialized silicon providers into what the company calls a spec-to-packaged-parts pipeline, explicitly aimed at reducing the engineering complexity that has historically made chiplet adoption difficult for companies outside of the largest chipmakers. While the initial ecosystem targets data center and high-performance computing applications, the underlying design tools and standardized chiplet interfaces are the same infrastructure that industrial IoT, robotics, and sensor-based product designers increasingly rely on for their own chip development.

The involvement of Samsung Foundry as a manufacturing partner in Cadence's ecosystem is also worth noting for what it signals about production readiness rather than just design tooling. A chiplet design framework only matters commercially once there is an actual foundry partner capable of manufacturing and packaging the resulting silicon at volume, and Cadence's decision to build a working silicon prototype with Samsung rather than releasing the framework as a purely theoretical specification suggests the ecosystem is aimed at near-term production use rather than a multi-year research exercise.

Why This Matters for Companies Building Connected Devices

For IoT hardware companies and product teams across the South Bay's dense hardware ecosystem, this shift changes the practical calculus of when custom silicon becomes worthwhile. Historically, only companies shipping IoT devices at very high volume could justify the cost and risk of a custom chip design. Standardized chiplets lower that threshold meaningfully, letting a mid-size hardware company combine a licensed or open-source RISC-V compute chiplet with off-the-shelf connectivity and security chiplets to get much of the differentiation benefit of custom silicon without the full non-recurring engineering cost of a ground-up monolithic design.

Security is a parallel and increasingly non-negotiable requirement running through this same shift. Regulatory bodies in multiple jurisdictions are moving toward mandating hardware-based security protections at the silicon level rather than relying solely on software updates applied after a device ships, which means IoT hardware roadmaps built around chiplet architecture increasingly need to treat a dedicated security chiplet with hardware roots of trust as a baseline requirement, not an optional add-on evaluated late in the design process.

Implementation Advice for IoT Product Teams

  1. Evaluate RISC-V for new product lines specifically, not existing ones. The royalty and licensing savings matter most when weighed against a clean-sheet design decision, since migrating an already-shipping product's software stack to a new architecture carries its own cost that can offset the silicon savings.
  2. Treat chiplet architecture as a build-versus-buy decision at the component level, evaluating which functions genuinely benefit from customization versus which can use standardized, pre-validated chiplets to save engineering time.
  3. Build hardware security requirements into the chip selection process from day one, rather than treating certification and hardware roots of trust as a late-stage compliance checkbox, given the direction regulatory requirements are moving.
  4. Watch the EDA tooling ecosystem, not just the chip vendors, since companies like Cadence are increasingly the ones determining how accessible chiplet-based design actually is for teams below the scale of the largest semiconductor companies.

Common Challenges in the Shift to Chiplet-Based IoT Hardware

ChallengeDescription
Software ecosystem maturityRISC-V's software tooling and library support still lag behind decades of Arm ecosystem maturity for some specialized use cases
Chiplet interconnect standardizationMixing chiplets from different vendors requires standardized interfaces that are still maturing industry-wide
Verification complexityCombining multiple independently designed chiplets into one package introduces new categories of integration testing
Supply chain and packaging capacityAdvanced chiplet packaging requires specialized manufacturing capacity that remains more limited than traditional monolithic chip fabrication

These growing pains mirror a pattern seen across other semiconductor manufacturing shifts covered elsewhere: a genuinely superior architecture still requires years of ecosystem maturation, tooling investment, and supply chain buildout before its theoretical advantages translate into reliable, at-scale production for the broader market rather than just the best-resourced early adopters.

What's Next for IoT Silicon

The direction of travel is now fairly well established even if the pace remains uncertain. Analysts expect chiplet adoption in IoT, automotive, and AI chipsets to expand significantly through the remainder of 2026, with companies moving from early custom chiplet experiments toward broader use of standardized compute, connectivity, and security chiplets across entire product lines rather than isolated flagship designs. Combined with RISC-V's continued gains in market share and the parallel push toward edge AI becoming a default rather than premium feature in IoT sensors and gateways, the underlying silicon powering the next generation of connected devices looks increasingly different from what has shipped for the past two decades. For South Bay hardware companies and the EDA tooling providers like Cadence that serve them, 2026 looks less like an isolated architecture debate and more like the year this shift became the default assumption for new IoT hardware design.

Frequently asked questions

RISC-V is an open, royalty-free instruction set architecture that reached 25 percent global market penetration at the start of 2026. Its lack of licensing fees, combined with leaner silicon and lower memory requirements, has made it increasingly attractive for cost-sensitive IoT devices facing rising memory prices.

A traditional system-on-chip packs all functions onto a single piece of silicon designed as one unit. A chiplet architecture breaks those functions into separate, smaller dies manufactured independently and assembled together in one package, allowing companies to mix standardized compute, connectivity, and security components instead of custom-designing an entire chip.

Cadence, headquartered in San Jose, launched a chiplet partner ecosystem in January 2026 combining pre-validated intellectual property from multiple partners into a streamlined design pipeline. As a leading EDA tools provider, Cadence's design software determines how accessible chiplet-based development actually is for hardware companies beyond the largest chipmakers.

Usually the savings matter most for new, clean-sheet product designs. Migrating an already-shipping product's software stack to a new architecture carries its own engineering cost that can offset the royalty and licensing savings RISC-V otherwise offers.

Regulatory bodies in multiple jurisdictions are moving toward mandating hardware-based security protections at the silicon level rather than relying solely on post-deployment software updates, making dedicated security chiplets with hardware roots of trust an increasingly baseline requirement for new IoT hardware.

Standardized interconnects between chiplets from different vendors are still maturing industry-wide, and combining independently designed chiplets into one package introduces new categories of integration testing that add complexity compared to traditional monolithic chip design.

Related articles

Top